拓扑图
二、实验要求
PC1--PC2 PC3不能访问PC5
PC2--PC1不能访问PC3 PC5
PC3--PC1 PC不能访问PC2
PC5--PC3不能访问PC1 PC2
三、实验思路
SW1的GE0/0/2和GE0/0/3配置混杂接口，GE0/0/1配置trunk口。
SW2的GE0/0/2和GE0/0/3配置混杂接口，GE0/0/1配置trunk口。
四、实验配置
<Huawei>sys
[Huawei]sys SW1
[SW1]vlan batch 10 20 30 40
[SW1]in g0/0/2
[SW1-GigabitEthernet0/0/2]port link-type hybrid
[SW1-GigabitEthernet0/0/2]port hybrid pvid vlan 10
[SW1-GigabitEthernet0/0/2]port hybrid untagged vlan 10 20 30
[SW1-GigabitEthernet0/0/2]in g0/0/3
[SW1-GigabitEthernet0/0/3]port link-type hybrid
[SW1-GigabitEthernet0/0/3]port hybrid pvid vlan 20
[SW1-GigabitEthernet0/0/3]port hybrid untagged vlan 10 20
[SW1-GigabitEthernet0/0/3]in g0/0/1
[SW1-GigabitEthernet0/0/1]port link-type trunk
[SW1-GigabitEthernet0/0/1]port trunk allow-pass vlan 10 20 30 40
<Huawei>sys
[Huawei]sys SW2
[SW2]vlan batch 10 20 30 40
[SW2]in g0/0/2
[SW2-GigabitEthernet0/0/2]port link-type hybrid
[SW2-GigabitEthernet0/0/2]port hybrid pvid vlan 30
[SW2-GigabitEthernet0/0/2]port hybrid untagged vlan 10 30
[SW2-GigabitEthernet0/0/2]in g0/0/3
[SW2-GigabitEthernet0/0/3]port link-type hybrid
[SW2-GigabitEthernet0/0/3]port hybrid pvid vlan 40
[SW2-GigabitEthernet0/0/3]port hybrid untagged vlan 10 40
[SW2-GigabitEthernet0/0/3]in g0/0/1
[SW2-GigabitEthernet0/0/1]port link-type trunk
[SW2-GigabitEthernet0/0/1]port trunk allow-pass vlan 10 20 30 40
五、查询配置
六、实验验证
